Installation

Raspberry Pi 2+

Build the stali image using the stali-pi project and flash your sd card for the Pi 2+. It should boot out of the box.

Prepare a disk partition for stali, we recommend formatting it with ext4fs

Mount the disk partition

; sudo su
# mkdir /mnt/rootfs-x86_64
# mount /dev/sdX /mnt/rootfs-x86_64

Clone rootfs-x86_64

# cd /mnt
# git clone http://git.sta.li/rootfs-x86_64

Setup the system

# cd /mnt/rootfs-x86_64/etc
# # adjust rc.init/exit, etc.

Prepare chroot

# mount -t proc proc /mnt/rootfs-x86_64/proc
# mount --rbind /sys /mnt/rootfs-x86_64/sys
# mount --rbind /dev /mnt/rootfs-x86_64/dev

chroot into stali

# chroot /mnt/rootfs-x86_64 /bin/sh
# # build a custom kernel, setup system/bootloader etc # TODO

Finish the installation and boot into stali.